|
Category
|
Details
|
|
General Information
|
|
|
- Material Number
|
X20AT4222
|
|
- Brand
|
B&R
|
|
- Product Type
|
Temperature Input Module
|
|
- Function
|
Measure resistance - based temperature using PT100 and PT1000 sensors and convert the data for further processing in industrial control systems
|
|
Input Specifications
|
|
|
- Number of Inputs
|
4
|
|
- Compatible Sensor Types
|
PT100 and PT1000
|
|
- Sensor Type Configuration
|
Configurable per channel
|
|
- Resistance Measurement
|
Direct resistance measurement possible
|
|
- Connection Type
|
Configurable 2 - or 3 - wire connections per module
|
|
- Resistance Measurement Range
|
Approximately 0.1 to 4500 Ω (varies depending on sensor type and application)
|
|
Converter Specifications
|
|
|
- Resolution
|
16 - bit
|
|
- Conversion Time
|
1 channel: 20 ms with 50 Hz filter; 2 - 4 channels: 40 ms per channel with 50 Hz filter
|
|
- Conversion Procedure
|
Sigma - delta
|
|
- Output Format
|
int or uint for resistance measurement
|
|
Filter Specifications
|
|
|
- Filter Time
|
Configurable between 1 ms and 66.7 ms
|
|
Power Requirements
|
|
|
- Bus Power Consumption
|
0.01 W
|
|
- Internal I/O Power Consumption
|
1.1 W
|
|
Status and Diagnostics
|
|
|
- Status Indicators
|
I/O function per channel, operating state, module status
|
|
- Diagnostics
|
Module run/error and input diagnostics available, likely through LED status indicators and software (details may vary based on the overall system setup)
|
|
Environmental Conditions
|
|
|
- Operating Temperature
|
Check B&R documentation for exact range, typically suitable for industrial environments (e.g., 0 °C - 55 °C in many standard industrial applications)
|
|
- Storage Temperature
|
Usually - 40 °C to 85 °C to allow for safe storage during non - operation periods
|
|
- Relative Humidity
|
5% - 95%, non - condensing to prevent damage to the module's electronics
|
|
- Vibration and Shock Resistance
|
Designed to withstand normal industrial vibrations and shocks; specific values can be found in the product's official technical documentation
|
|
Mounting and Dimensions
|
|
|
- Mounting Method
|
Likely DIN - rail mounting, a common method in industrial control systems for easy installation and replacement
|
|
- Dimensions
|
Approximately 9.6 cm x 1.2 cm x 5.6 cm (may vary slightly depending on the source and exact product version)
|
|
- Weight
|
Around 0.02 kg (lightweight for easy integration into various setups)
|
|
Certifications
|
|
|
- Compliance
|
Meets relevant industry standards; specific certifications such as CE, UL, etc., can be verified through B&R's official product documentation or by contacting the manufacturer
|
